Hah! I'm not sure I have any plans but I know I should be doing something!
After doing some piecework for two hours the night before last, I found myself having the urge to do some genealogy. I haven't done any serious work on that in over six months. I spent about an hour that evening and most of yesterday, when I wasn't doing household chores, sorting through a few stacks of papers and trying to remember where I was last in that endeavor. I alphabetized some files, and re-wrote some notes from scattered slips of paper into a spiral notebook, did a little perusing around my favorite genealogy internet sites and found by the end of the day that I really didn't want to work on it, and really didn't figure out where I'd left off. Today, I'll probably just file away what I pulled out and sorted and revisit it all at a later date.
On my mind to do are so many things that need to be done, in addition to wanting to get back into gear with my quilting. I need to discuss with Marty, and plan, as to whether or not I'll be doing Quilt Camp as I did last year. I need to re-evaluate our financials by running some reports from Quicken, and I need to file what I posted to Quicken last week. I need to start looking at my calendar and determining those trips and durations to the northern wet land to continue assisting my dad.
But back to today. First on the agenda...a shower and getting dressed. I've had my coffee and toast and watched a quilt show. I need to clear off the dining room table which has become a dumping ground for all things this week. I need to prepare some meat that's in the refrigerator for tonight's dinner and freeze the rest. Maybe I'll prepare all of it and freeze some of the cooked product for the guys for when I'm not here. That presumes they'll remember it's there.
I need to decide if I want to continue with Toaster-Oven Tuesday, having already missed this past Tuesday again even though I'm home. Today's meat prep will be partially done in the T-O so I should have a post this coming week as long as I remember to take pictures.
Showing posts with label planning. Show all posts
Showing posts with label planning. Show all posts
Saturday, May 3, 2014
Monday, October 22, 2012
What Have I Been Doing?
It certainly doesn't seem like much since I haven't posted again in over a week...I'm sure that makes me a successful blogger, Hah!
Well, this is what I've been working on: a 3-D 'model' of what my 'new' kitchen will likely look like, utilizing the existing space and being careful to not add to the so-very-low budget (mental budget, no actual dollar amount set!) by having to unnecessarily change existing plumbing and electrical too much.
Picture 1 is a bird's eye view ~ excuse the wonkiness, I'm only using tape, graph paper and scissors. I've planned 30" counterspace to the left of the sink, 42" to the right of the sink, 36" for range, and 30" to the right of the range. Some of that could be flexible, meaning less, not more room. There is a window over the sink - I don't want to move it. Currently the dishwasher is at the left of the sink with a skinny 6" or narrower cabinet between it and the wall. Where I show the range, the current layout stops there with that being a peninsula with a range top. My oven was inset into that wall on the left but that's where we reconfigured the bathroom which is on the other side of the wall, so I presently have no oven. Directly opposite the sink I would like a large floor to ceiling cabinet which is shown where the yellow is and beside it would be a small counter with upper and lower cabinets and a shelf for the microwave. I'd like a portable island with cabinet base no larger than 3'x 4' - I've seen some images of a couple I'd be pleased with. The other 'square' at the lower-center is the refrigerator (currently the pantry which to the left in the pic is an unused cavity which formerly held the furnace - now on the roof with the A/C). The cavity will become a shelved area to house all those occasionally used small appliances and things like maybe boxed cereal, potatoes, onions - dark & cool. There's a doorway into the hall which runs parallel behind that wall of the cab/counter/microwave plan. The frig was (ok, still is) where I want that counter/cabs/microwave, so you can imagine how much it juts into the floorspace of the kitchen and doesn't leave much room with a peninsula. - the orig. kitchen is ca. 1966.
Picture 2 shows from a lower view. Where the cabinets end, well, actually where I plan to extend those cabinets as shown, is currently a 7'11" picture window overlooking the backyard and our massive Modesto Ash tree - where I watch those squirrels, minus one :(. In my plan, that window is gone, and in it's place is either a 5' or 6' sliding glass door so that we have an exit from the kitchen to the patio to bbq rather than having to carry everything out of the kitchen, down the hall, and through the computer room to get to that slider and the patio - I wonder who the brilliant architect of that was?! Do you know how much stuff gets spilled on the floor between the two locations? The new refrigerator location may not be ideal but there really isn't anyplace else without running new gas lines through concrete or overhead conduit and then I'd lose counter and cabinet space as well. Having a portable island will tie the frig in a little more and will give me a place to set things from the frig when needed.
Picture 3 shows the dining area - before I continued the side wall. That wall is solid floor to ceiling, side to side. The back shows the opening for the projected door, as well as my cut-outs representing the sizes and space that our table, chairs and hutch/china cabinet take up. I would prefer and door that swings open, but there just isn't the room so a slider is more fitting. Between the refrigerator and where the hutch is, there is the door to the garage and the hutch is against the solid wall of the garage. My washer/dryer are on the other side of that wall in the garage and I'd hoped to have included that in this remodel, but it doesn't look like that's going to happen. I'll live with it. Our dining room has been 'huge' compared to the actual kitchen space, so that will be changing - we rarely entertain, so no biggy. When we bought the table, my thoughts were that we'd be having gatherings of folks over a lot so the table, with extensions would be 4' x 9' and is still plenty big without the extensions. We were once far more involved in social activities than we are now. Oh well, something else I've gotten used to over the years...or not.
I'm glad I went through this exercise. I needed a 3-D model to get my mind wrapped around what the possibility could be and to see if it would work for us. I think it will and I think this is what I'll present to our contractor. Each square of the graph paper equals 6". It's not entirely accurate, but is close enough. The sink counters would appear to be 30" deep, but in reality, I think they'd be closer to 24" for the cabinets, but the counter may come out close to 26".
My thoughts for the wall at the left end of the kitchen would be to put up a wire grid where I could use S hooks to hang pans or utensils, with maybe a shelf or two above for my cookbooks. Will have to wait and see. We considered moving the wall where the shorter section is, but it's a load-bearing wall, and that complicates things and I'm sure would add more than what we want to spend on the re-do.
I welcome any comments or suggestions, but keep in mind, I've considered this for now over 16 years taking into account how we function as a family and how I cook presently (not much) and how I really would like to cook (and used to) again.
 |
| Picture 1 |
Well, this is what I've been working on: a 3-D 'model' of what my 'new' kitchen will likely look like, utilizing the existing space and being careful to not add to the so-very-low budget (mental budget, no actual dollar amount set!) by having to unnecessarily change existing plumbing and electrical too much.
Picture 1 is a bird's eye view ~ excuse the wonkiness, I'm only using tape, graph paper and scissors. I've planned 30" counterspace to the left of the sink, 42" to the right of the sink, 36" for range, and 30" to the right of the range. Some of that could be flexible, meaning less, not more room. There is a window over the sink - I don't want to move it. Currently the dishwasher is at the left of the sink with a skinny 6" or narrower cabinet between it and the wall. Where I show the range, the current layout stops there with that being a peninsula with a range top. My oven was inset into that wall on the left but that's where we reconfigured the bathroom which is on the other side of the wall, so I presently have no oven. Directly opposite the sink I would like a large floor to ceiling cabinet which is shown where the yellow is and beside it would be a small counter with upper and lower cabinets and a shelf for the microwave. I'd like a portable island with cabinet base no larger than 3'x 4' - I've seen some images of a couple I'd be pleased with. The other 'square' at the lower-center is the refrigerator (currently the pantry which to the left in the pic is an unused cavity which formerly held the furnace - now on the roof with the A/C). The cavity will become a shelved area to house all those occasionally used small appliances and things like maybe boxed cereal, potatoes, onions - dark & cool. There's a doorway into the hall which runs parallel behind that wall of the cab/counter/microwave plan. The frig was (ok, still is) where I want that counter/cabs/microwave, so you can imagine how much it juts into the floorspace of the kitchen and doesn't leave much room with a peninsula. - the orig. kitchen is ca. 1966.
 |
| Picture 2 |
 | |
| Picture 3 |
Picture 3 shows the dining area - before I continued the side wall. That wall is solid floor to ceiling, side to side. The back shows the opening for the projected door, as well as my cut-outs representing the sizes and space that our table, chairs and hutch/china cabinet take up. I would prefer and door that swings open, but there just isn't the room so a slider is more fitting. Between the refrigerator and where the hutch is, there is the door to the garage and the hutch is against the solid wall of the garage. My washer/dryer are on the other side of that wall in the garage and I'd hoped to have included that in this remodel, but it doesn't look like that's going to happen. I'll live with it. Our dining room has been 'huge' compared to the actual kitchen space, so that will be changing - we rarely entertain, so no biggy. When we bought the table, my thoughts were that we'd be having gatherings of folks over a lot so the table, with extensions would be 4' x 9' and is still plenty big without the extensions. We were once far more involved in social activities than we are now. Oh well, something else I've gotten used to over the years...or not.
I'm glad I went through this exercise. I needed a 3-D model to get my mind wrapped around what the possibility could be and to see if it would work for us. I think it will and I think this is what I'll present to our contractor. Each square of the graph paper equals 6". It's not entirely accurate, but is close enough. The sink counters would appear to be 30" deep, but in reality, I think they'd be closer to 24" for the cabinets, but the counter may come out close to 26".
My thoughts for the wall at the left end of the kitchen would be to put up a wire grid where I could use S hooks to hang pans or utensils, with maybe a shelf or two above for my cookbooks. Will have to wait and see. We considered moving the wall where the shorter section is, but it's a load-bearing wall, and that complicates things and I'm sure would add more than what we want to spend on the re-do.
I welcome any comments or suggestions, but keep in mind, I've considered this for now over 16 years taking into account how we function as a family and how I cook presently (not much) and how I really would like to cook (and used to) again.
Subscribe to:
Posts (Atom)
